HTK-Vent GmbH
Inkustraße 1-7/Stiege 8
A-3400 Klosterneuburg
Phone: + 43 (0) 664 467 40 20
E-Mail: info@htk-vent.at
Internet: www.htk-vent.at
Here you can see a small selection of our roof fans. Our product range includes a wide range of other products made of different materials, which we will be happy to offer you on request or manufacture especially for you. These roof ventilators are mainly used in workshops, industrial halls and public facilities.
Some roof blowers are also available in ATEX design, for intended use in potentially explosive atmospheres. Send us a short message and we will get back to you immediately.
The RF series roof-mounted exhaust fans are designed for ventilation of rooms with a low degree of air pollution.
pst max = 880 Pa
Qmax = 15 750 m3/h
Pmax = 2 770 W
RF/EC type roof fans are designed for ventilation of rooms with low air pollution. The fans are used in extraction systems in houses, supermarkets, industrial premises, shops, warehouses, garages, car parks and outbuildings.
pst max = 1 080 Pa
Q max = 10 100 m3/h
P max = 1 405 W
Roof exhaust fans with vertical discharge are intended for ventilation systems of buildings with low air pollution.
pst max = 880 Pa
Qmax = 14 500 m3/h
Pmax = 2 770 W
Roof fans type RFV/EC are designed for ventilation of rooms with low air pollution. The fans are used in extraction systems in houses, supermarkets, industrial premises, shops, warehouses, garages, car parks and outbuildings.
pst max =1 240 Pa
Q max = 9 860 m3/h
P max = 1 470 W
The fans of the RBH series are used in the exhaust air systems in supermarkets, industrial halls, workshops, storage rooms, garages, car parks, utility buildings.
pst max = 1 800 Pa
Qmax = 22 000 m3/h
Pmax = 7 500 W
MPB-R roof fans are widely used in extraction systems for polluted air and pneumatic transport systems.
pst max = 2 300 Pa
Q max = 5 050 m3/h
P max = 4000 W
Standard roof fans for extraction operation. Models 500 and 800 are made of high-strength injection-moulded plastic, models 1300 and 2000 of high-quality sheet steel.
pst max = 845 Pa
Qmax = 1 690 m3/h
Pmax = 301 W
CTB roof fans are designed for ventilation of rooms with low air pollution. They are used in exhaust systems in homes, toilets, offices, shops, warehouses.
pst max = 220 Pa
Q max = 1 400 m3/h
P max = 110 W
CTB roof fans are designed for ventilation of rooms with low air pollution. They are used in exhaust systems in homes, toilets, offices, shops, warehouses.
pst max = 215 Pa
Qmax = 1 490 m3/h
Pmax = 91 W
Range of centrifugal roof fans in horizontal discharge format, designed for smoke extraction under fire conditions and certified to F400 120 (CE marking).
pst max = 1 070 Pa
Q max = 38 000 m3/h
P max = 7 500 W
Range of centrifugal fans in the roof outlet with vertical ventilation, for smoke extraction under combustion conditions and certified F400 120 (CE marking).
pst max = 1 680 Pa
Qmax = 44 500 m3/h
Pmax = 26 000 W
ROOF-H roof ventilators are designed for ventilation of warehouses, shops, industrial halls and farm buildings. They are also characterised by high temperature resistance, therefore they are also recommended for ventilation, e.g. of grates, of bonnets in the meat industry and gastronomy.
pst max = 950 Pa
Q max = 26 400 m3/h
P max = 5 500 W
Ventilation of warehouses, shop and industrial halls, agricultural buildings in farming, etc. Due to their high temperature resistance, they are particularly recommended as extractors of over-grates, of bonnets in the meat industry and gastronomy.
pst max = 1 300 Pa
Qmax = 22 000 m3/h
Pmax = 7 500 W
Roof fans with integrated controller (accessories available on request). The controller offers four operating modes: fixed pressure mode, fixed capacity mode, proportional mode and min-max mode.
pst max = 500 Pa
Q max = 4 260 m3/h
P max = 467 W
Range of centrifugal roof fans in vertical discharge format. Very flat design. Base made of galvanised sheet steel.
pst max = 890 Pa
Qmax = 12 700 m3/h
Pmax = 2 639 W
Range of axial roof fans with horizontal air outlet configuration. Base made of galvanised sheet steel. Cowl made of spun aluminium.
pst max = 680 Pa
Q max = 44 900 m3/h
P max = 5 500 W
The fans of the RBM series are used in the exhaust air systems in supermarkets, industrial halls, workshops, storage rooms, garages, car parks, utility buildings.
pst max = 3 080 Pa
Qmax = 12 450 m3/h
Pmax = 7 500 W
Do you have questions about our services or a specific project?
We are happy to assist you and develop solutions that will help you and your company move forward.
Please use our contact form.
HTK-Vent GmbH
Inkustraße 1-7/Stiege 8
A-3400 Klosterneuburg
Phone: + 43 (0) 664 467 40 20
E-Mail: info@htk-vent.at
Internet: www.htk-vent.at