HTK-Vent GmbH
Inkustraße 1-7/Stiege 8
A-3400 Klosterneuburg
Phone: + 43 (0) 664 467 40 20
E-Mail: info@htk-vent.at
Internet: www.htk-vent.at
Side channel blowers
+ 43 (0) 664 467 40 20
info@htk-vent.at
www.htk-vent.at
Home » Side channel blowers
Here you can see a selection of our side channel blowers. These are also called ring compressors or vacuum pumps. In contrast to classic fans, the corresponding medium is compressed several times by centrifugal force due to the design and thus achieves a higher differential pressure.
Our powerful side channel blowers are characterised by a high load capacity as well as an energy-efficient efficiency. Contact us – we will be happy to send you a non-binding offer.
Single-stage side channel compressor for transporting dust-free and non-explosive media. Wherever enormous pressure increases and relatively low air volumes are required, this compressor is the preferred choice. e.g.: Printing machines, pneumatic systems, industrial hoovers, pneumatic tubes, fish farming, etc.
pst max = 42 000 Pa
Qmax = 1 100 m3/h
Pmax = 15 000 W
Single-stage side channel compressor for transporting dust-free and non-explosive media. Wherever enormous pressure increases and relatively low air volumes are required, this compressor is the preferred choice. e.g.: Printing machines, pneumatic systems, industrial hoovers, pneumatic tubes, fish farming, etc. A frequency converter is required for this series.
pst max = 39 000 Pa
Qmax = 1 000 m3/h
Pmax = 15 000 W
Single-stage side channel compressor with integrated frequency converter for transporting dust-free and non-explosive media. Wherever enormous pressure increases and relatively low air volumes are required, this compressor is the preferred choice. e.g.: Printing machines, pneumatic systems, industrial hoovers, pneumatic tubes, fish farming, etc.
pst max = 47 600 Pa
Qmax = 1 430 m3/h
Pmax = 15 000 W
Single-stage side channel compressor with V-belt drive for transporting dust-free and non-explosive media. Wherever enormous pressure increases and relatively low air volumes are required, this compressor is the preferred choice. e.g.: Printing machines, pneumatic systems, industrial hoovers, pneumatic tubes, fish farming, etc.
pst max = 50 000 Pa
Qmax = 1 500 m3/h
Pmax = 25 200 W
Multi-stage side channel compressor with direct drive for transporting dust-free and non-explosive media. Wherever enormous pressure increases and relatively low air volumes are required, this compressor is the preferred choice. e.g.: Printing machines, pneumatic systems, industrial hoovers, pneumatic tubes, fish farming, etc.
pst max = 64 000 Pa
Qmax = 1 270 m3/h
Pmax = 15 000 W
Do you have questions about our services or a specific project?
We are happy to assist you and develop solutions that will help you and your company move forward.
Please use our contact form.
HTK-Vent GmbH
Inkustraße 1-7/Stiege 8
A-3400 Klosterneuburg
Phone: + 43 (0) 664 467 40 20
E-Mail: info@htk-vent.at
Internet: www.htk-vent.at