HTK-vent
- HTK-Vent GmbH Eisenhütte31/B A-3400 Klosterneuburg
- +43 (0) 664 467 4020
- info@htk-vent.at


HTK-vent
Fans designed for transporting non-aggressive and non-explosive gases.
Typical applications:
- pneumatic transport,
- blowing in drying systems (e.g. graphic machines, processing of plastics),
- air blowing systems in combustion / thermal treatment systems (e.g. melting furnaces),
- for air transport in ventilation systems and technological lines,
- dust content in the transported medium up to 1g/m3.
- low-pressure, single-sided, direct-driven radial fan
- impeller welded from black steel sheet, backward curved blades welded from carbon steel sheet, painted with primer paint, balanced according to ISO1940-1
- housings welded from carbon steel sheet
- fans are normally painted in blue RAL5010, corrosivity class C3
- transport of a medium in the temperature range -20°C to +80°C
- standard figure LG270
- asynchronous 3-phase 230 / 400V, 50Hz (power up to 3,0 kW)
- asynchronous 3-phase 400 / 690V, 50Hz (power from 4,0 kW)
- IE3 efficiency class
- degree of protection IP55
- insulation class F
- adapted to frequency regulation
- motor ambient temperature from -20°C to +40°C
- anti-vibration inlet and outlet connections
- support frame
- inlet and outlet covers
- connectors, reducers, adapters
- vibro-isolators
- any LG or RD figure
- painting in a color other than the standard one according to the RAL palette
- painting in a higher corrosivity class
- galvanized housing and impeller
- housing and impeller made of stainless steel 1.4301
- housing and impeller made of stainless steel 1.4404
- for transporting a medium with a temperature below -20°C and above +80°C
- for work in potentially explosive atmospheres in zone 1 or 21 or 2 or 22
- with clutch drive
- with belt drive
- with thermal and acoustic insulation
- with a motor for a voltage or frequency other than the standard
- with a motor with a different IP protection class
- with a motor with a different insulation class
- with a motor equipped with sensors or additional cooling
- motor ambient temperature below -20°C and above +40°C
Do you have questions about our services or a specific project?
We are happy to assist you and develop solutions that will help you and your company move forward.
Please use our contact form.